[JacketAU]

Here's a few screenshots of a map I'm currently making for fun, I have RoR and destruction everywhere, I'd love to collaborate with someone and make a more expansive map pack.

Attached thumbnail(s)

• 
• 

[Aleks]

JacketAU, on 23 May 2024 - 05:20 AM, said:

Here's a few screenshots of a map I'm currently making for fun, I have RoR and destruction everywhere, I'd love to collaborate with someone and make a more expansive map pack.

It's always good to see a map for Ion Fury every once in a while, since not many people seem to do these - so looking forward to the release!

[JacketAU]

Aleks, on 23 May 2024 - 10:10 AM, said:

It's always good to see a map for Ion Fury every once in a while, since not many people seem to do these - so looking forward to the release!

Thank you! I was thinking the same so I decided to mess around with their custom mapster and it's been a lot of fun! I've still been working on a Duke map too, I'm having issues with the version of mapster I'm using for it though where weapon and ammo sprites don't appear visible when I test the map, even though they're fine in the editor, do you or anyone else know what could be causing this?

[December Man]

Here's my first map. I started it literally around 25 years ago, seemingly finished it, never published it, then remembered about it this year, and decided to fix it up and significantly improve it: it was full of map errors and tons of poor design choices like cheap instakill traps. It also wasn't the prettiest princess. Mind you, I don't have much experience mapping, so it's pretty old school in its design. Still, I think it's a decent effort from me.
Here's the link:

https://www.mediafir...FRIEND.zip/file

Attached thumbnail(s)

• 
• 
• 
• 
• 
• 
• 
• 
• 

[Aleks]

 December Man, on 31 May 2024 - 02:12 AM, said:

Here's my first map. I started it literally around 25 years ago, seemingly finished it, never published it, then remembered about it this year, and decided to fix it up and significantly improve it: it was full of map errors and tons of poor design choices like cheap instakill traps. It also wasn't the prettiest princess. Mind you, I don't have much experience mapping, so it's pretty old school in its design. Still, I think it's a decent effort from me.

Played it and it was longer than I expected (took me around 30 minutes), but also feels very "1st mappish", which is understandable from your post. There are some areas that were seemingly given a significant make-over, but also some that probably weren't that much touched since the map was initially conceived. It has a theme and story, but still feels very 1996ish, though would pass as a good effort. The fights are more intense and there are interesting combinations of monsters or layouts that allow a lot of verticality. The beginning feels a bit mazey. There's also a "super secret" that gives you an extra keycard (in general, there seemed to be too many keycards in the end...) which can be used much later to open up an armory. The secret initiates probably my favourite battle in the level due to how the room is set-up with dim cycling lights and how the monsters come in waves, so make sure not to miss it. The ending is quite stingy as well, also there aren't too many weapons and ammo, so you should make your shots count. There are some newbie mistakes (once again, doom doors with wrong wall orientation, come on!), but the level is definitely worth trying out.

Also, an unrelated question, but looking at the email provided in the text file, I'd hazard a guess you're Polish - if that's true, I'm glad to see another Pole making maps for Duke!

[High Treason]

Cannot remember which shots I posted before, so some of these may be the same location. Mostly just checking in to say my thing isn't dead, in fact I've worked on it almost non-stop for an extended period of time. Currently it's with beta testers while I take a month or so off, as I need a break from the editor. Once that's done, testing should also be done, so I'll fix up whatever problems I can, finish the last map and if all goes to plan, be ready for release at the end of summer as intended.



The fix list for when I return is already quite long, with over 20 items on it, but I don't think that part will actually take a super long time to do. Building the eighth map might take a while, though, as while it's meant to be small, a fair bit of what it's meant to do are thus far only theoretical. Quite a few things in the project were and had to be changed or, in some cases, scrapped entirely. No matter what, it will be eight maps total, but DOS limits apply so they're each only about 1/4 the size of a modern level at most. It won't be the best thing since sliced bread, but it has been fun to work on and hopefully someone, somewhere, gets some enjoyment from playing it when it releases.

[Phredreeke]

weren't you banned?

[December Man]

 Aleks, on 31 May 2024 - 04:21 PM, said:

Played it and it was longer than I expected (took me around 30 minutes), but also feels very "1st mappish", which is understandable from your post. There are some areas that were seemingly given a significant make-over, but also some that probably weren't that much touched since the map was initially conceived. It has a theme and story, but still feels very 1996ish, though would pass as a good effort. The fights are more intense and there are interesting combinations of monsters or layouts that allow a lot of verticality. The beginning feels a bit mazey. There's also a "super secret" that gives you an extra keycard (in general, there seemed to be too many keycards in the end...) which can be used much later to open up an armory. The secret initiates probably my favourite battle in the level due to how the room is set-up with dim cycling lights and how the monsters come in waves, so make sure not to miss it. The ending is quite stingy as well, also there aren't too many weapons and ammo, so you should make your shots count. There are some newbie mistakes (once again, doom doors with wrong wall orientation, come on!), but the level is definitely worth trying out.

Also, an unrelated question, but looking at the email provided in the text file, I'd hazard a guess you're Polish - if that's true, I'm glad to see another Pole making maps for Duke!

Thanks for the review! I'm glad you liked that secret fight, I was hoping for that exact reaction

Yup, I'm Polish. I wrote that readme when I was a teenager, and I only slightly changed it for this release. I still use that e-mail address

:edit: Also, what do you exactly mean with "doom doors with wrong wall orientation"?

[JacketAU]

 December Man, on 02 June 2024 - 12:09 AM, said:

:edit: Also, what do you exactly mean with "doom doors with wrong wall orientation"?

I got the same feedback and never figured this out either lol (doors seem tutorial perfect in both our maps)

If you do please let me know

[Aleks]

 December Man, on 02 June 2024 - 12:09 AM, said:

Also, what do you exactly mean with "doom doors with wrong wall orientation"?

 JacketAU, on 03 June 2024 - 01:58 AM, said:

I got the same feedback and never figured this out either lol (doors seem tutorial perfect in both our maps)

In 3D mode, you can press "O" on a wall to swap its orientation between "top" and "bottom" ("top" is default on every wall, "bottom" is useful for e.g. autoaligning wall panning with "." as it works correctly on windows/lintels/holes). However, this also changes how the wall behaves when the sector is moving in a vertical direction (like an up- or down-open/split door) - it's just visual of course, but in general, you want the texture to move along with the door, so "top" orientation is required. With "bottom" orientation, the wall texture will just "slide" or "roll" like it was telescopic (kinda like PowerPoint animations with some hijinks or cuts between the scenes in Star Wars). This happens with the blue key door (which is a split door) in JacketAU's map (with split door I think you generally want to also swap the bottom texture with "2" to pan it properly in most cases). In December Man's map, I think this happened with 1 up-open door in the 2nd red keycard section.

[December Man]

 Aleks, on 03 June 2024 - 02:24 AM, said:

In 3D mode, you can press "O" on a wall to swap its orientation between "top" and "bottom" ("top" is default on every wall, "bottom" is useful for e.g. autoaligning wall panning with "." as it works correctly on windows/lintels/holes). However, this also changes how the wall behaves when the sector is moving in a vertical direction (like an up- or down-open/split door) - it's just visual of course, but in general, you want the texture to move along with the door, so "top" orientation is required. With "bottom" orientation, the wall texture will just "slide" or "roll" like it was telescopic (kinda like PowerPoint animations with some hijinks or cuts between the scenes in Star Wars). This happens with the blue key door (which is a split door) in JacketAU's map (with split door I think you generally want to also swap the bottom texture with "2" to pan it properly in most cases). In December Man's map, I think this happened with 1 up-open door in the 2nd red keycard section.

Ooohh... Thanks for info! It's the armory door that's borked. Didn't know how to fix it and then forgot about it!

Attached thumbnail(s)

• 

[JacketAU]

 Aleks, on 03 June 2024 - 02:24 AM, said:

In 3D mode, you can press "O" on a wall to swap its orientation between "top" and "bottom" ("top" is default on every wall, "bottom" is useful for e.g. autoaligning wall panning with "." as it works correctly on windows/lintels/holes). However, this also changes how the wall behaves when the sector is moving in a vertical direction (like an up- or down-open/split door) - it's just visual of course, but in general, you want the texture to move along with the door, so "top" orientation is required. With "bottom" orientation, the wall texture will just "slide" or "roll" like it was telescopic (kinda like PowerPoint animations with some hijinks or cuts between the scenes in Star Wars). This happens with the blue key door (which is a split door) in JacketAU's map (with split door I think you generally want to also swap the bottom texture with "2" to pan it properly in most cases). In December Man's map, I think this happened with 1 up-open door in the 2nd red keycard section.

Right yeah this is fixed (or was lined up according to the clipboard image the whole time at least) but I did fix the doors textures scrolling like that post version 1 not knowing what it was you meant until now anyways, thank you though for clarifying!

[High Treason]

Probably considered an 'advanced' technique, but for bothersome doors where frame rate isn't important I nest a red walled sector in the frame and then drag its edges to be one unit short of touching the edge of the door frame. This is especially good for split doors or more complicated doors, as it doesn't have any connection to the doorjamb and so won't affect its texture position.

Regarding frame rate, Z doors that exist across a frame and are connected to its sides will stop any rendering of the space behind, provided there's no other way to see into that space from the player's position. It probably isn't an issue most people run into, but is certainly worth remembering, especially as most other doors can exist nested within a Z door sector - I have a train level where the sliding doors between cars are inside ceiling doors that move instantly to give the illusion that only the sliding door is there. This is because looking along the train would have the other cars render and cause the frame rate to shit the bed on the Pentium II it was tested against. With the ceiling doors, the engine cannot render beyond the door (the train windows are 1-way walls) and so the game runs somewhere in the mid double figure frame rates or higher... on a modern PC the game would probably just outrun the monitor regardless, especially as nearly everyone uses syrup panels now.

[Nacho]

The entrance to "Lunch" Facility. Seeing how I want to visualize an elevator to the end level that will get blown up upon use, forcing the player to find an alternative path.

[ToiletDuck64]

Three things about a certain map I've been working on lately, shown in the screenshot:
* I've been messing around with the overall lighting/visibility settings; I want the full distance to be visible, but I don't want it to be all fullbright either.
* No points for guessing what kind of map this is (other than, you know, a clusterfuck of spritework and moving TROR platforms).
* Funny story: Normally I use r3888 (which is old as fuck) but all the spritework keeps causing r3888 to eat shit, so I've been having to use a later, more stable version of Mapster for a substantial amount of the work on this map.

Attached thumbnail(s)

• 

[Mike Norvak]

ToiletDuck64, on 29 June 2024 - 03:24 AM, said:

Three things about a certain map I've been working on lately, shown in the screenshot:
* I've been messing around with the overall lighting/visibility settings; I want the full distance to be visible, but I don't want it to be all fullbright either.
* No points for guessing what kind of map this is (other than, you know, a clusterfuck of spritework and moving TROR platforms).
* Funny story: Normally I use r3888 (which is old as fuck) but all the spritework keeps causing r3888 to eat shit, so I've been having to use a later, more stable version of Mapster for a substantial amount of the work on this map.

Holeeeee sheeeet!

[Graphics]

Hey, just thought I would let you guys know that I'm still alive. Not too much to report on my mod. Here's some screenshots.

1: Wet Dry World by ToiletDuck64 with proper textures. Thanks again for allowing me to use your maps in my mod. I'm currently adding that blue fog FX to make it more like the N64. In the screenshot, it's rendering in good old blurry textures, to make it more 64ish.

2: My King Field map with some touch ups. I'm trying to recreate some of the things I did before. To not lose its authentic look, I've also back tracked a bit. No bloody walls or anything like that. Here it is rendering in blocky pixelated textures for that PlayStation look.

If anyone wants to work on this mod with me, feel free to message me. Take care everyone and I hope you're all doing well.

Attached thumbnail(s)

• 
• 

[Seb Luca]

Nice rendering of water

[Graphics]

Seb Luca, on 08 July 2024 - 12:41 AM, said:

Nice rendering of water

Thank you. It's nothing fancy, just custom lighting to the environment under the TROR water with a custom palette change on the top. I might take that out and manually pre-bake the lighting. But that's only because I want my multiplayer mod to have multiple player skins. Hard to explain in a short paragraph, but long story short it depends on how the multiple player skin code reacts to the custom palettes.

[Seb Luca]

Well ! I know it's not Duke Nukem, but I'm proud of the little Farm-&-Craft game that I am designing on RPG Maker XP



@Graphics : Ok, thank you for the description It seems very specific. Well done !

[juvenite]

Awesome to see people still make games in old RPG Maker versions in this day and age. I was trying myself to make a game about my personal project in VX Ace, but lost the motivation eventually due to limitations of the engine. God knows when I'll make that game, I think other mediums are taking priority . All the power to you and your project, Seb!

[Graphics]

@Seb Luca: Your project looks awesome!

Okay, without explaining to much. I figured out a neat way to make player skins without editing the game's code. This method uses the color palette and some of the EDuke32 features meant for 3d sprite work. But there might be a glitch when walking into areas that are assigned to that palette. I'm hoping that's only on the palette with the same number. Because then, it wouldn't glitch out.

Well, I'm working on this, I leave you guys with a screenshot of an apple made in the Build engine, using TROR. If all goes right, my mod should be the first Duke Nukem multiplayer mod with multipliable player skins.

Attached thumbnail(s)

• 

[Graphics]

It works, the multiplayer skin trick for my mod. Needless to say, there are only two player skins so far, and that's Duke Nukem and a Pigcop. I hope to add more later. But for this next update, it's a good start.

Attached thumbnail(s)

• 
• 

[Seb Luca]

Thank you very much

@juvenite : I think XP is the best version. It allows so much freedom, as long as we immerse ourselves in the code. Good luck too for your project. I hope we will see samples.

@Graphics : Superb apple, which although simple, it defies the constraints of build. And the menu is very refreshed. Well done !


So ! I return to the construction of my project

[Graphics]

They say never give up on a good thing. To think, I was considering ditching this map. But, after fixing and updating the landscape pieces. I got back to work on this one. I expanded the terrain, added more textures and fixed up the areas that were eyesores. Here's a screenshot of the work I've done.

Attached thumbnail(s)

• 

[Graphics]

Sorry if I'm over posting here. But I just wanted to share the progress on this map. Expanded the map more and added a small island, I always seem to add to my landscape maps. Here are some detailed screenshots. The size of the map is bigger than the default grid map and covers just about 35% the maxed-out grid map.

Correct specs.
1146/4096 sec. 5448/16384 wal. 532/16384 spr.

With some simple modifications, I could probably run this on DOS. Also, I figured out something neat about TROR (from EDuke32) lakes with see through water... I'm only going to need 1 TROR divide to make the see through water with beach beds (curved hills under water). Meaning, I could go nuts on TROR with this map and still have a see through lake. Like the Goose Island graphics test a few years ago.

Attached thumbnail(s)

• 
• 
• 

[brullov]

I think that TROR is underestimated in use as a reflected floor effect. Made a simple rain script and graphics to test the concept:

[darkcaleb]

Hey there guys i am just gonna drop this here. This was my last update of resident evil mod. Its a unreleased project. Do whatever you want with it. And this is my exit from the community.

https://www.mediafir...4%2529.rar/file

[Graphics]

I love those reflections. I believe you're on to something. I remember doing something similar, but it wasn't a good as what you've done. I hope you don't mind if I borrow that on some my maps.

As for me, I had fun working on the Link to the past map last night. Here's how it's currently looking. I might also update my mod soon with all this work I've done. And good morning, everyone.

Attached thumbnail(s)

• 
• 
• 

[lllllllllllllll]

I am almost finished butchering incubator