Duke3D HRP: new/updated art assets thread

161 Pages
« First
←
126
127
128
129
130
→
Last »

You cannot start a new topic
You cannot reply to this topic

Duke3D HRP: new/updated art assets thread "Post and discuss new or updated textures/models for the HRP here"

Steveeeie

#3811 Posted 31 May 2013 - 12:51 AM

Fox, on 31 May 2013 - 12:26 AM, said:

I think that the focus on making highres replacament for all tiles was a bad decision. Emphasis has been put in quantity instead of quality, as a result several textures or models don't serve the purpose of enhancing the game. Besides everything has been made by independent users, so the surfaces don't fit together (i.e. each alien texture with it's own tone of green). The inclusion of new engine features such as Polymer half-way doesn't help.

===//===//===

Duke Nukem 64:

Posted Image

Not sure if there is any pratical difference in the Small Medkit (perhaps the color), but the Portable Medkit has some discrepancies, especially the big red cross.

The small is the same.

I already have a duke 64 version of the portable medkit, I will upload a version of it for you when I re-make it.. as I prefer it to the original.

Fox

Fraka kaka kaka kaka-kow!

#3812 Posted 31 May 2013 - 01:06 AM

Do not forget that the Portable Medkit is also used as a texture in some levels.

Spoiler

Steveeeie

#3813 Posted 31 May 2013 - 01:19 AM

I always thought that looked abit odd on doors.. could we make something a little more panel like ?

Fox

Fraka kaka kaka kaka-kow!

#3814 Posted 31 May 2013 - 01:30 AM

I checked and Warp Factor is the only level where it is (visibly) used as a wall. But there is the problem that some mod may display it on the screen, so it would be necessary to have a rendered sprite...

This post has been edited by Fox: 31 May 2013 - 01:33 AM

Steveeeie

#3815 Posted 31 May 2013 - 03:34 AM

Nothing this lunchtime I'm affraid. will re-do the health packs tonight and upload a final pack for those. and will probably also upload the camera.

Regards.

TON

#3816 Posted 31 May 2013 - 06:06 AM

I like the small medkit

The toilet should be like this :lol:

This post has been edited by TON: 03 June 2013 - 01:42 PM

LeoD

Duke4.net topic/3513

#3817 Posted 05 June 2013 - 09:37 AM

Since we're aiming for a full HRP release anyway, I have decided to run PNGOUT over it's current incarnation. Some 25MiB can be saved. I've verified that both old and new PNGs convert to binary identical TGAs. Be prepared for a rather big svn update download soon. But I'll wait for the updates announced by Steveeeie and Tea Monster, so that they can be added in before that.

Mateos

#3818 Posted 05 June 2013 - 09:58 AM

LeoD, on 05 June 2013 - 09:37 AM, said:

Is it a clone of PngOptimizer?

LeoD

Duke4.net topic/3513

#3819 Posted 05 June 2013 - 10:12 AM

Mateos, on 05 June 2013 - 09:58 AM, said:

Is it a clone of PngOptimizer?

No idea who cloned whom, but PNGOUT is a tool by the awesoken man himself.

Steveeeie

#3820 Posted 05 June 2013 - 11:59 AM

LeoD, on 05 June 2013 - 09:37 AM, said:

Im pretty ill, so I wont have any news this coming week. But I will definitely be committing more stuff before the deadline.

Mateos

#3821 Posted 05 June 2013 - 12:25 PM

Get well soon :lol:

Tea Monster

Polymancer

#3822 Posted 05 June 2013 - 03:38 PM

Sorry to hear that Steveeeie. Hope you get better soon.

Mark

#3823 Posted 05 June 2013 - 04:12 PM

If the powers that be decide this is good enough, go ahead and include it in the next HRP release. If it's not up to snuff, anyone else can use it for their projects. The defs are included in the zip file. The new mic is on the right. :lol:

Attached thumbnail(s)

Attached File(s)

0762_mike.zip (168.99K)
Number of downloads: 185

This post has been edited by Mark.: 05 June 2013 - 04:13 PM

ReaperMan

#3824 Posted 05 June 2013 - 04:19 PM

That model is 100 times better mark, but the texturing still needs some work. The metal doesn't look metallic.

This post has been edited by ReaperMan: 05 June 2013 - 04:20 PM

Mark

#3825 Posted 05 June 2013 - 05:06 PM

Thats because its brushed aluminum. A satin finish. :lol:

Rellik

#3826 Posted 05 June 2013 - 06:21 PM

As a former theater geek, I figure I ought to offer a couple crits on the mic stand:

1. I haven't seen many mics where the grill is red, the original mic has a foam cover that that is often used to dampen harsh sounds and prevent spit from getting to the mic element.

2. Maybe it's the angle, but the mic clip looks a little unnatural, lacks a pivot point.

3. smart thinking on the antenna! :lol:

(most wireless mics these days integrate the antenna in the body of the mic per the example above, but it's a good choice to have a visible antenna)

4. can't say much about the stand other than a chrome look or polished black would be preferable.

Fox

Fraka kaka kaka kaka-kow!

#3827 Posted 05 June 2013 - 06:47 PM

I don't think it is as good as the other models that have been created recently, and seems to not match real-life microphones. It should also have a wire, even if in the original sprite the wire disappear in mid-air.

These pictures somewhat matches the sprites and could be used as reference:

Posted Image

This post has been edited by Fox: 05 June 2013 - 06:48 PM

Night Wolf

#3828 Posted 05 June 2013 - 07:12 PM

Could people please make sure the colours match the colours in the 8bit sprites, especially Reds and Greens.
Even if you just use the eyedropper tool in photoshop, it's not that hard people.

Fox, on 05 June 2013 - 06:47 PM, said:

It should also have a wire, even if in the original sprite the wire disappear in mid-air.

I'm pretty sure it's meant to be a wireless microphone

This post has been edited by ozz: 05 June 2013 - 07:16 PM

Plagman

Former VP of Media Operations

#3829 Posted 05 June 2013 - 07:21 PM

Agreed on closely matching colors, or highpal won't kick in properly.

Tea Monster

Polymancer

#3830 Posted 06 June 2013 - 01:43 AM

I've finished the textures on Duke (he has a nuke buckle now).

The Cycloid is still getting a bit of work, but should be done in a week or so.

LeoD

Duke4.net topic/3513

#3831 Posted 06 June 2013 - 03:57 AM

Mateos, on 05 June 2013 - 12:25 PM, said:

Get well soon :lol:

Fox, on 05 June 2013 - 06:47 PM, said:

It should also have a wire, even if in the original sprite the wire disappear in mid-air.

I'd prefer the antenna solution - and a foam cover.

Tea Monster, on 06 June 2013 - 01:43 AM, said:

The Cycloid is still getting a bit of work, but should be done in a week or so.

Nice. No rushing. I'm more in favour of a milestone release rather than a deadline.

Plagman, on 05 June 2013 - 07:21 PM, said:

Agreed on closely matching colors, or highpal won't kick in properly.

So using the read key card for example looks bad because of the pal 0 blue card and not due to non-optimized highpals?

This post has been edited by LeoD: 06 June 2013 - 03:59 AM

Mark

#3832 Posted 07 June 2013 - 01:53 PM

I made a quick fix to the mic. I'm moving on to some other mapping stuff so hopefully more people approve of this one. If so, I'll upload it here again. I added the swivel and screws along with the foam screen which is a little closer to original color.

Attached thumbnail(s)

LeoD

Duke4.net topic/3513

#3833 Posted 07 June 2013 - 02:22 PM

Mark., on 07 June 2013 - 01:53 PM, said:

Aahhh... much better!

Minigunner

#3834 Posted 14 June 2013 - 12:57 PM

Spoiler

Took 3 hours to get this far. I'm gonna have a lot of fun with the details... when I get around to doing so. :lol:

Edit:
I did put one detail on that was left out on the HRP model. Take a guess:
Posted Image

Also, I may have a try at making the Lameduke handle as well. The biggest problem I have is that there is nothing that shows how the other side of the gun was designed. That's something only Chuck would know. :lol:

This post has been edited by Minigunner: 14 June 2013 - 07:20 PM

Mateos

#3835 Posted 14 June 2013 - 01:03 PM

With time you'll get experienced, and you'll be able to do fast and great looking things! For now it's good looking, you'll get soon on next step :lol:

Steveeeie

#3836 Posted 15 June 2013 - 02:34 AM

Minigunner, on 14 June 2013 - 12:57 PM, said:

Spoiler

Took 3 hours to get this far. I'm gonna have a lot of fun with the details... when I get around to doing so. :lol:

Edit:
I did put one detail on that was left out on the HRP model. Take a guess:
Posted Image

Im pretty sure the DNF RPG has the lame duke handle on the other side. I think the Duke 3D RPG would be the same.

Fox

Fraka kaka kaka kaka-kow!

#3837 Posted 15 June 2013 - 03:29 AM

I think it should be just like it is, the Lameduke gun with a modified grip on the left.

Minigunner

#3838 Posted 15 June 2013 - 08:05 AM

I was thinking of having it a symmetrical weapon with the final handle on the left and the Lameduke handle (with firing button, not a trigger) on the right. I think it would be very uncomfortable to hold, though.

TON

#3839 Posted 16 June 2013 - 06:14 AM

I found a palm tree model and its author says:

"You can copy, modify, distribute and perform the work, even for commercial purposes, all without asking permission."
Posted Image

Can someone put it in the game and upload the md3 model with textures to see how it would be? I tried but I have problems with transparency:

Spoiler

The model is named: palm_straight
Download

Steveeeie

#3840 Posted 16 June 2013 - 08:14 AM

TON, on 16 June 2013 - 06:14 AM, said:

I found a palm tree model and its author says:

"You can copy, modify, distribute and perform the work, even for commercial purposes, all without asking permission."
Posted Image

Can someone put it in the game and upload the md3 model with textures to see how it would be? I tried but I have problems with transparency:

Spoiler

The model is named: palm_straight
Download

Nice, but I thought the HRP was supposed to be all original art?