[Micky C]

Steveeeie, on 28 May 2013 - 04:27 AM, said:

Thanks, there isn't anything tricky going on here, so it was pretty straight forward

I was actually thinking it lacked detail, but I wasn't too concerned because of its size.

It still needs some screws, and some form of mount.

Now that you mention it yeah. I was mesmerized by the lense piece I guess

[Steveeeie]

TON, on 28 May 2013 - 04:28 AM, said:

Wow

By the bye, I know is in progress but I think the lens should have also in left,right and down the word secucam like the original

I think the grey is just to show where the lens is on the original sprite.

[NightFright]

Can you maybe (re)do the Enforcer or the slime babes next? Just like that camera... thanks a lot!

[Steveeeie]

NightFright, on 28 May 2013 - 05:53 AM, said:

Can you maybe (re)do the Enforcer or the slime babes next? Just like that camera... thanks a lot!

I'm not very good at organic objects, but I will do some soon I was planning on practicing organic modeling on the slime babe.

Did anybody notice the slimebabe in Rage?

[Paul B]

I think there needs to be a red light on it too so we know its functional and not just a toy. lol

[TON]

Paul B, on 28 May 2013 - 06:14 AM, said:

I think there needs to be a red light on it too so we know its functional and not just a toy. lol

The model isn't textured yet ,it has the light

[Steveeeie]

TON, on 28 May 2013 - 06:21 AM, said:

The model isn't textured yet ,it has the light

This

[Steveeeie]

Another Lunchtime update.

Didn't have as long today

Attached thumbnail(s)

• 

[Spiker]

You definately need more lunch breaks! How do you make a low-poly of it?

[Steveeeie]

Spiker, on 29 May 2013 - 07:08 AM, said:

You definately need more lunch breaks! How do you make a low-poly of it?

I wish the day was one long lunch break! I usually model on top of it, some times I will make a low poly from a high poly for harder shapes, but it doesn't always give the best results.

[Steveeeie]

Here is the finished hydrant:

Sorry its not something new. I'm trying to wrap up the models that aren't finished yet.

I have re-uv'd and textured the hydrant, as there was a lot of wasted space in the old map and I wasn't very pleased with the texture.

I have also included the broken hydrant.

Steve

Attached thumbnail(s)

• 

Attached File(s)

•  Hydrants.zip (4.07MB)
  Number of downloads: 186

[Spiker]

Yeah, you have like 10(?) models in the works right now so it's good you managed to finish this one before starting another one.

[Steveeeie]

Spiker, on 29 May 2013 - 11:53 AM, said:

Yeah, you have like 10(?) models in the works right now so it's good you managed to finish this one before starting another one.

Theres probably a few more than that I have got myself sorted out and organised.. so the majority should be here this week.

[Steveeeie]

Here is the new Large Medkit and Portable Medkit.

The large medkit is a completely different model to the one previously uploaded.

The small medkit isn't included, I will be doing this at a later date.

Enjoy

Attached File(s)

•  Health.zip (4.52MB)
  Number of downloads: 212

[TON]

Small medkit should be like this




In white

[Steveeeie]

Nice references! Will crack this out tommorow night !

[Steveeeie]

LUNCHTIME:

Attached thumbnail(s)

• 

[LeoD]

Really nice work, Steveeeie. Now for the inevitable nitpicking:

Steveeeie, on 29 May 2013 - 11:45 AM, said:

Here is the finished hydrant [...] I have also included the broken hydrant.

Besides that you chose the wrong manufacturer , after destroying the hydrant, the broken model clips into the ground, at least in E1L1, E1L2. Maybe the model's origin needs to be moved.

Steveeeie, on 29 May 2013 - 01:19 PM, said:

Here is the new Large Medkit and Portable Medkit

Though looking great, dropping the symmetry of the first aid kit is a bit problematic: It forces all maphacks to be revised, because they were made assuming that both sides look the same. (Especially my user map maphacks are affected, but some regular game maps appear to have this issue as well.) And the majority of maps, which will never be maphacked, might contain hard to spot first aid kits forever.

I'd appreciate if you would make the kit recognisable from the back side, too.
jpg]

And I think we need some more wooden textures from your tree :

[Steveeeie]

LeoD, on 30 May 2013 - 10:35 AM, said:

Really nice work, Steveeeie. Now for the inevitable nitpicking:

Besides that you chose the wrong manufacturer , after destroying the hydrant, the broken model clips into the ground, at least in E1L1, E1L2. Maybe the model's origin needs to be moved.
0950_brokenhydrant-clip.jpg

Ok

LeoD, on 30 May 2013 - 10:35 AM, said:

Though looking great, dropping the symmetry of the first aid kit is a bit problematic: It forces all maphacks to be revised, because they were made assuming that both sides look the same. (Especially my user map maphacks are affected, but some regular game maps appear to have this issue as well.) And the majority of maps, which will never be maphacked, might contain hard to spot first aid kits forever.
E4L6-0053_firstaid-onesided.jpg
I'd appreciate if you would make the kit recognisable from the back side, too.
0053_firstaid_d-mockup.jpg 0053_firstaid_d-mockup2.jpg

Ok I can do that but it will take a while, it will need to go back to high poly phase.

LeoD, on 30 May 2013 - 10:35 AM, said:

And I think we need some more wooden textures from your tree :
E4L5-wood.jpg

I'll look into this once I finish some of the models, there are a few wood textures I'm looking at replacing.

[Fox]

But it do make sense that the Medkit is labeled from only one side. It's nowhere to be as problematic as, say, all weapon sprites.

[Steveeeie]

Im SUPER pleased with how this turned out.. >>>SUPER<<< PLEASED

Attached thumbnail(s)

• 

[ForeverDuke]

I often wondered what the original artists used for references. Is there a list somewhere? Sometimes it's hard to tell what a 24 pixel tall object is

LeoD, on 30 May 2013 - 10:35 AM, said:

Really nice work, Steveeeie. Now for the inevitable nitpicking:

Besides that you chose the wrong manufacturer , after destroying the hydrant, the broken model clips into the ground, at least in E1L1, E1L2. Maybe the model's origin needs to be moved.

Oh and Steveeeie your model work is excellent. I can't believe the pace you crank things out.

[Steveeeie]

Thanks man

My day is Work - Morning, 3D - Lunch, Work - Afternoon, 3D Evening.

I just love doing it, it is a lot of fun.

[Fox]

ForeverDuke, on 30 May 2013 - 01:10 PM, said:

Is there a list somewhere?

[LeoD]

Fox, on 30 May 2013 - 12:44 PM, said:

But it do make sense that the Medkit is labeled from only one side.

Yes, it does, but I think that HRP-real-life outweighs that.

Fox, on 30 May 2013 - 12:44 PM, said:

It's nowhere to be as problematic as, say, all weapon sprites.

I disagree on this one. Completely different colours on each side are more obvious than, say, an RPG handle pointing into the wrong direction. Steveeeie, I won't be after you for not changing this ASAP, but you should keep it on your list somewhere.

Steveeeie, on 30 May 2013 - 01:08 PM, said:

Im SUPER pleased with how this turned out.. >>>SUPER<<< PLEASED

Please put a red cross on the backside, too.

[Steveeeie]

LeoD, on 30 May 2013 - 02:24 PM, said:

Please put a red cross on the backside, too.

There is

[Steveeeie]

Any requests for lunch?

Has to be a model.

[Lunick]

Steveeeie, on 31 May 2013 - 12:09 AM, said:

Any requests for lunch?

Has to be a model.

Lunick is a good model

[Steveeeie]

LeoD.

Don't Commit any of the new Medkits.

I am going to provide new files for all of them at the weekend.

[Fox]

Plagman, on 25 May 2013 - 10:55 PM, said:

There used to be a "HRP to-do list" on someone's homepage, it was a nifty PHP thing with all ART tiles with green or red background depending if they had been remade or not. I think at some point it stopped being updated and we used a wiki to summarize what was left to be done instead. These days I think pretty much everything is remade, it's just a matter of starting to replace stuff that doesn't look as good as it could.

I think that the focus on making highres replacament for all tiles was a bad decision. Emphasis has been put in quantity instead of quality, as a result several textures or models don't serve the purpose of enhancing the game. Besides everything has been made by independent users, so the surfaces don't fit together (i.e. each alien texture with it's own tone of green). The inclusion of new engine features such as Polymer half-way doesn't help.

===//===//===

Duke Nukem 64:



Not sure if there is any pratical difference in the Small Medkit (perhaps the color), but the Portable Medkit has some discrepancies, especially the big red cross.