[LeoD]

Upper/lower case fix for DukePlus on Linux (r2.31 from 2012-03-10, Fissile Materials site):
EDIT: Download removed. Go here.
(Also takes care of some more warning messages in the log.)

king karl, if you are not on Windows, this will most likely solve your super trooper issue.

 king karl, on 23 July 2012 - 06:46 PM, said:

Just ifgured out why i havnt seen any super troopers....they are invisible! (and potentialy unattackable) just filled a map with 100s of assault captains and turned off random atributes, sure enough i could hear the super troopers and get hurt by them but not see them, i tried firing in all directions to see if they could be hit and i heard no pain sounds nor saw any bullets not hi thte wall but who knows i may have just been unlucky.

how to fix, just delete all my duke plus stuff and do a fresh install?

[Kyanos]

Hey Dan, as a fan of DP I decided to try out Pauls new map using your mod. He and LeoD were talking about mantling and whatnot, and Paul went to such trouble putting the fix in his map that I decided to give it go. Anyways, I noticed the sprites acting funny with the polymer lights (see attached pic) I tried to duplicate this running Eduke32 without DP. The sprites did not act this way.

[Danukem]

 Drek, on 14 October 2012 - 06:26 AM, said:

Hey Dan, as a fan of DP I decided to try out Pauls new map using your mod. He and LeoD were talking about mantling and whatnot, and Paul went to such trouble putting the fix in his map that I decided to give it go. Anyways, I noticed the sprites acting funny with the polymer lights (see attached pic) I tried to duplicate this running Eduke32 without DP. The sprites did not act this way.
Light_bug.png

Can you confirm that those sprites had polymer lights shining on them in the non-DP test? In DP, the player emits a small light at all times.

[Micky C]

I think the chances are that there were no polymer lights in the vanilla game. Usually with masked TROR surfaces if there are sprites there can be horrible messes with invisible surfaces around the edges of the sprite, you can notice that in the water ripple sprites in the vanilla game if you look closely. And I'd bet that polymer lights exaggerate this problem to what you see in the bottom screenshots.

[Danukem]

 Micky C, on 14 October 2012 - 01:31 PM, said:

I think the chances are that there were no polymer lights in the vanilla game. Usually with masked TROR surfaces if there are sprites there can be horrible messes with invisible surfaces around the edges of the sprite, you can notice that in the water ripple sprites in the vanilla game if you look closely. And I'd bet that polymer lights exaggerate this problem to what you see in the bottom screenshots.

Yeah that's what I was thinking. The problem shown in the screenshots is a renderer issue.

[Kyanos]

Those pics I posted earlier were all from duke plus as the shrinker flashes the sprite borders flash. I can confirm that I had polymer lights running in this case in vanilla duke and didn't have the issue. My belief now that you reminded me of the small light that follows the player, is thatt it is the interaction of the two lights causing the glitch. And yes that would be a renderer issue.

[tomo]

Hay Dukeplus is awsome . i was wondering i defined the roch maps into a episode it looks like this

definelevelname 5 0 ROCHpack/Roch.map 20:00 10:00 ROCH
definelevelname 5 1 ROCHpack/Roch2.map 20:00 10:00 ROCH2
definelevelname 5 2 ROCHpack/ROCH3.map 20:00 10:00 ROCH3
definelevelname 5 3 ROCHpack/ROCH4.map 20:00 10:00 ROCH4
definelevelname 5 4 ROCHpack/ROCH5.map 20:00 10:00 ROCH5
definelevelname 5 5 ROCHpack/Roch6.map 20:00 10:00 ROCH6
definelevelname 5 6 ROCHpack/ROCH7.map 20:00 10:00 ROCH7
definelevelname 5 7 ROCHpack/Roch8.map 20:00 10:00 ROCH8
definelevelname 5 8 ROCHpack/ROCH_SC1.map 15:00 05:00 ROCH Secret Level

Ive been looking for ROCH_SC1.map and cant find it because i want to know if i have defined the episiode properly so if any one knows what roch map leads to the secret level that would be heaps cool.Thanks

[LeoD]

 tomo, on 13 November 2012 - 09:35 AM, said:

... so if any one knows what roch map leads to the secret level that would be heaps cool.Thanks

Roch3 IIRC. But I recommend playing them standalone. Starting a map with most weapons and/or lots of ammo which you have spared from the previous one spoils the gameplay IMO.
EDIT: I'm working on HRP maphacks for Roch. Stay tuned.

[tomo]

 LeoD, on 13 November 2012 - 11:14 AM, said:

Roch3 IIRC. But I recommend playing them standalone. Starting a map with most weapons and/or lots of ammo which you have spared from the previous one spoils the gameplay IMO.
EDIT: I'm working on HRP maphacks for Roch. Stay tuned.

Thats awsome.Are you sure its Roch3 ive searched for hours and cant find it?

[LeoD]

tomo, on 16 November 2012 - 06:31 AM, said:

Thats awsome.Are you sure its Roch3 ive searched for hours and cant find it?

Only as far as I trust the note I took about that a couple of years ago. Can't come up with the exact secret exit location, sorry. You could try searching it in Mapster32.

[Kenny mckormick]

Hey all = )

I came back to trying mapping some stuff for dp, i'm...chilling on a map axed on a gameplay a bit "hell revealed -like" since i think this is too bad there is not enoughs map with LOTS of monsters for my taste

So ofc why making a solo map on Vanilla Duke?
And i was thinking about a small suggestion that if is'nt too hard for it's value, would be cool for enhancing the variety of monsters behaviors
You know the 256-Tag for monster who sometime active "special" effect..

Well i think him untrigger the tank Auto-bomb System would be a cool feature!Since this are making them much less dangerous in some situation (+ once you did it a lot, in most of situations this is pretty easy) and with 2x and 3x life,that should be great for Strenghtener enemy

edit : I also noticed a bug with spawner : if you use them to spawn NewbeastJump,they spawn but are invisible (or incredibly tiny,since we still see the life bar),due to the fact they are'nt resized i think.

[Fantinaikos]

I have a question about Eduke32.exe: The SVN repositary one and the one Dukeplus are different right? so, if i update my eduke eduke32 snapshot to the latest official, replacing that of Dukeplus, I will always take errors / incompatibilities / bizzare alerts in the changelog changelog while I'm playing Dukeplus? and this happens regardless that im uses more or less the HRP? (regard this, i have the latest polymost override pack).

There is also a sort of temporary mini-patch?

[Danukem]

Fantinaikos, on 05 January 2013 - 09:07 AM, said:

I have a question about Eduke32.exe: The SVN repositary one and the one Dukeplus are different right? so, if i update my eduke eduke32 snapshot to the latest official, replacing that of Dukeplus, I will always take errors / incompatibilities / bizzare alerts in the changelog changelog while I'm playing Dukeplus? and this happens regardless that im uses more or less the HRP? (regard this, i have the latest polymost override pack).

There is also a sort of temporary mini-patch?

There shouldn't be any errors using the latest binary unless there are errors in the DukePlus code that got exposed by eduke32 updates. Would you mind attaching the log file of the errors?

[LeoD]

Fantinaikos, on 05 January 2013 - 09:07 AM, said:

I have a question about Eduke32.exe: The SVN repositary one and the one Dukeplus are different right? so, if i update my eduke eduke32 snapshot to the latest official, replacing that of Dukeplus, I will always take errors / incompatibilities / bizzare alerts in the changelog changelog while I'm playing Dukeplus? and this happens regardless that im uses more or less the HRP? (regard this, i have the latest polymost override pack).

If it plays fine, you are fine. The HRP had some changes since the last DukePlus release, but besides the log messages there are no actual problems I know of.

Fantinaikos, on 05 January 2013 - 09:07 AM, said:

There is also a sort of temporary mini-patch?

See the topmost post on this page. Unzip my fix over your DukePlus installation and most messages should go away.

Trooper Dan, on 05 January 2013 - 11:31 AM, said:

There shouldn't be any errors using the latest binary unless there are errors in the DukePlus code that got exposed by eduke32 updates.

This.

Trooper Dan, on 05 January 2013 - 11:31 AM, said:

Would you mind attaching the log file of the errors?

Here are mine for a start. (Polymost logs are the same when using the override pack.)

Attached File(s)

•  DukePlusPolymer.log (8.93K)
  Number of downloads: 441
•  DukePlusPolymerNixFix.log (6.52K)
  Number of downloads: 364

[Danukem]

Hmmm. Well, when I ran it with the latest build on my end, I did not get most of those errors. Perhaps I had already fixed them and forgot about it without uploading? In any case, I fixed what remained -- just the projectile redefinitions, as far as i can tell. Apparently, those are now hardcoded so including definitions in CON is redundant (also, it appears that the numbers were changed). But nothing was actually broken as far as the player's experience was concerned.

I'm currently uploading an update to the Fissile Materials site, complete with a new version number. Should be finished in about 15 minutes. No new content has been added, this was just a maintenance update to fix those warnings/errors and include the latest EDuke32.

[iLikeTheUDK]

Can't find the lasergun option in the DukePlus weapon options.

[Danukem]

iLikeTheUDK, on 06 January 2013 - 09:05 AM, said:

Can't find the lasergun option in the DukePlus weapon options.

Go under the enemies menu and check the "troopers drop laser guns" option (or whatever it's called). It doesn't replace any of the regular weapons and it's not found in maps (except for a few DukePlus maps) so the only way to get it is to kill a trooper with the option enabled or cheat it to yourself with the console.

[LeoD]

Upper/lower case fix for DukePlus on Linux (r2.35 from 2013-01-05, Fissile Materials site):
(Also takes care of some more warning messages in the log.)
EDIT: download removed. Go here.

[Helixhorned]

LeoD, on 05 January 2013 - 12:07 PM, said:

Here are mine for a start. (Polymost logs are the same when using the override pack.)

Uh.. I need to remember to remove those "SHGetFileInfo failed with error code" sometime. I had hoped that they would give some information on the failure reason, but I guess it's not that useful...
The PROJ_XXX labels are predefined from CON, so it's unnecessary to duplicate them in user code.
These ones are strange, I'm not sure why they occur:

Quote

warning: case mismatch: passed "strooper\plasmaboom.wav", real "plasmaboom.wav"

[LeoD]

Helixhorned, on 06 January 2013 - 11:32 AM, said:

The PROJ_XXX labels are predefined from CON, so it's unnecessary to duplicate them in user code.

Fixed in DukePlus 2.35

Helixhorned, on 06 January 2013 - 11:32 AM, said:

These ones are strange, I'm not sure why they occur:

These occur due to the use of the backslash in the path. Replace by a slash and everything is OK. See my *nix fix above.

[Mike Norvak]

Mia Max, on 15 July 2009 - 12:50 PM, said:

@DeeperThought:

How many models do you accept?
I got 11 different models that have 3 MB alltogether.

I just would like to know if this is already too much or if I may add some more.

Mia, Have you these models somewhere on your HD? They could be useful for WGR2

[Mike Norvak]

Double post: Can someone tell me who the hell made this map:




I remember downloaded it from these forums back in 2009 but I can't find the thread. It was named "Small-BattleMap-DukePlus" For the complex sloping style I guess it belongs to Muelsa???

[Mateos]

These models are available on some Quake 3 download websites, can't find the link in the mess of my bookmarks x)
Edit: Found -> http://www.wemakemap...m/mapmodels.htm

Also this one with good props:
http://blackrayne.net/models_1.php

Edit 2: Forgot the main reason I post: they're all in MD3; I used them for Wolfenstein Enemy Territory.

[Mike Norvak]

Thank you Mateos, Gonna check it asap.

[Micky C]

I think those maps might have been done by NerdZilla, he did quite a lot of large scale sloping a while back.

[Mark]

I think you're right. I might have a couple of his test terrain maps laying around on a backup somewhere. I should start the search.

[Bloodshot]

So how would I go about giving the double barrel SG in DP a sprite? My laptop's card doesn't support OpenGL (And Eduke flat out crashes when it's enabled)

I'd like to be able to see more than a black box on my screen. I have a sprite for it, but I just need to know how to assign a sprite to it. Is it already assigned just a blank set of sprites that I can modify myself, or would I have to do something special?

[Fantinaikos]

There seems to be another small bug owing Dukeplus: The first person Devastator model does not show (that one of the BFG replacement when I select the option yes anyway). I also tried the vanilla game, and with that the problem does not occur so i guess it is not a flaw of the override pack.
Almost certainly depends from a wrong/forgotten line into the .def simple to fix.

[splitterface]

hum... i just got the new DP build and installed it but for me it still doesnt work, i get the same like before. when it starts it starts as normal atomic instead of with DP

i did try removing the dp folder i had and then dropping in the new one instead of overwriting my dp folder to see if that helped, and i also tried using the included eduke32 build instead of the latest one, but neither helped.
in both cases when i started dukeplus it still started as basic atomic without DP


EDIT:
just tried making an empty folder, drop in the duke3d.grp and atomic.grp and then unpack the entire contents of dukeplus zip in it and run it, and even then i still get the exact same, when i use nothing except the contents of the DP zip

[Mateos]

What about unpack the ZIP and select DP folder on EDuke32 launch?

Works well here by this way

I think if you want to keep the ZIP, you would have to put it in autoload/duke3d.grp, not sure about that.